PRODUCT FEATURE / COUNTERSUNK MAGNETS
Custom Countersunk Neodymium Magnets for Secure Assembly
A countersunk magnet route focused on the envelope, countersink geometry, fastener interface, coating and secure assembly.
Drawing-led review preferred. A clear written requirement can start the discussion when a drawing is not ready.
ENGINEERING SNAPSHOTKeep the requirement visible from review to release.
Fastener interface included
N25 to N52 stated range
Fit and exposure dependent
Section view preferred
01 / FEATURE INPUTS
Define the countersunk feature.
The section view should make the countersink, through feature, depth, included angle or mating fastener relationship clear. The finished face and reference datum matter just as much.
Finished envelope
State outside dimensions and thickness.
Countersink geometry
Show the feature in section with clear reference dimensions.
Fastener interface
Identify the screw, seating condition and clearance.
Magnetization
Mark the pole direction and reference face.
02 / MATERIAL AND SURFACE
Protect the feature and dimensional basis.
The coating must work with the countersink and the assembly environment. Dimensional allowance should be reviewed with the selected finish and the critical seating surface.
03 / PROCUREMENT AND INSPECTION
Release the feature that secures the assembly.
A countersunk RFQ should include the fastener context, application environment, quantity and inspection priorities. Checks can focus on the seating feature, envelope, coating and magnetic direction.
Feature dimensions
Countersink and seating geometry against the drawing.
Envelope
Outside dimensions, thickness and edge condition.
Surface
Coating and visual condition at the seating face.
Polarity
Direction and performance against the requirement.
04 / ENGINEERING HANDOFF
Review a countersunk magnet drawing.
Share the section view, fastener interface, coating, quantity and any known inspection requirements. The feature can then be reviewed as part of the complete assembly.
Section
Countersink geometry and mating fastener.
Environment
Exposure, coating and surface condition.
Release
Feature, dimension and magnetic inspection basis.
COUNTERSUNK / REVIEW BASIS
Make the seating feature clear.
The fastener interface is the key input for a useful technical review.
Discuss the Countersunk Magnet